top of page

Production process: hot melt welding, high strength sewing thread sewing

 

Material: polyester, polypropylene, acrylic, PPS, aramid, P84, glass fiber, PTFE

 

Product introduction:
Dust filter bag is the heart of the operation of the bag filter, usually cylindrical pulse type filter bag is hung vertically in the dust collector dust-containing gas enters the dust collector from the air inlet, passes through the guide plate of the ash hopper, so that some of the large particles of dust in the gas are separated by inertia force and fall directly into the ash hopper. The dusty gas enters the filter bag filtering area of the box, most of the dust is collected on the outer surface of the filter bag, while the clean gas enters the inside of the filter bag through the filter media, and the purified gas enters the upper box through the filter bag opening and then is discharged from the air outlet. The cage inside the filter bag is used to support the bag and prevent the bag from collapsing, while it helps to remove and redistribute the dust cake.
Dust filter bag is a kind of high efficiency dust filter media, with good ventilation performance, high dust removal efficiency, and certain acid resistance, alkali resistance and heat resistance, dust filter bag is taken polyester staple fiber or long fiber as raw material, divided into room temperature and high temperature filter media, long service life, good air permeability, high dust collection rate, dust removal efficiency up to 99.999%.

 

Application industry
Iron-making plants, steel-making plants, ferroalloy plants, refractory plants, foundries, power plants, cement plants, chemical plants, grain processing plants, carbon black plants, aluminum plants, etc.

FW-DFB029

  • High temperature resistance, better strength and good wear resistance;
    higher interception efficiency, can meet certain emission requirements, emission concentration ≤ 5mg/Nm3;
    Good permeability, low resistance, low operating energy consumption and low processing air speed;
    easy to clean ash, online back-blowing and offline cleaning, long service life

    Technical parameters

    Product Name Polyester Polypropylene Acrylic PPS Aramid P84 Glass fiber laminate PTFE laminate
    Unit gram weight g/m²±5% 500 500 500 500 550 550 750 750
    Thickness mm±10% 2.0 2.0 2.3 1.8 2.2 2.6 1.2 1.2
    Air permeability dm3/dm2
    /min@20mmH2O±20%
    180 180 180 150 230 180 40 40
    Radial fracture strength N/5cm> 1300 1100 1300 900 900 600 3400 700
    Weft breaking strength N/5cm> 1400 1400 1400 1200 1200 900 2400 700
    Continuous use temperature 120 90 125 180 200 240 250 240
     ℃  150 110 140 210 230 260 260 260

     

bottom of page